Cart
← Back to Product Catalog

Active Audio – SA150P+

Speakers

More details

Similar Products

studiolive-315ai_600px_0|studiolive-315ai_600px_0
  • PreSonus

PreSonus – StudioLive 315AI

The StudioLive 315AI features a 15-inch woofer, along with the same triamped power amplification as the 312AI. This unit is the best choice if you are not using a subwoofer, though of course adding a StudioLive 18sAI subwoofer will give you even more bottom. Perfect for larger venues and open-air applications, the 315AI provides all the power you’d expect from a 3-way, 15-inch loudspeaker but packed into a 2-way-sized enclosure. The StudioLive 315AI features a 15-inch woofer, along with the same triamped power amplification as the 312AI. This unit is the best choice if you are not using a subwoofer, though of course adding a StudioLive 18sAI subwoofer will give you even more bottom. Perfect for larger venues and open-air applications, the 315AI provides all the power you’d expect from a 3-way, 15-inch loudspeaker but packed into a 2-way-sized enclosure. The StudioLive 315AI requires the SL-Dante-SPK card for Dante connectivity.
    Speakers
  • Dante Ch: 2x2
  • 24-bit
See the product
cm62-bgm-ii_black_grille_1
  • SoundTube

SoundTube – IPD4-CM62-BGM-II

Offering an economical option for expansion of audio coverage in a digital speaker system, this Dante®-enabled coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube®'s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Color-coded (green) tile bridge, UL listed conduit clamp and paint shield are included.

    Speakers
See the product
CA401D
  • DMIX

DMIX – CA-401D

Technical parameters：

Speaker model: CA-401D

Unit configuration: 1×4"(100mm) Full frequency unit

Frequency range: 120Hz-20kHz

Rated power: 30W

Sound pressure level: 110dB

Sensitivity: 90dB

Coverage Angle: 100°×90°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 145×253×180 (W×H×D)

    Speakers
See the product