Similar Products
- Sony
Sony – NXLK-IP45F
- Dante Interface Cards
- Dante AV Enabled
- AES67 Enabled
- Lightware
Lightware – MX2M-AUX-DANTE-32CH
MX2M-AUX-DANTE-32CH is a Dante and AES67 compatible input and output board for the MX2M modular matrix family. The hot-swappable IO board is seen as two distinct Dante devices from the Dante network.
Each Dante card can simultaneously send and receive 16 mono audio channels from the Dante network it is connected to via its 1GbE connectors. This makes the board capable of sending and receiving 2 x 16 mono audio channels from the same or different Dante domains with the same or different sampling frequencies.
The received audio is made available to all video and audio outputs over the audio layer of the matrix as LPCM audio streams. Similarly, the audio sent to the Dante network can originate from any of the video or audio inputs of the matrix carrying LPCM audio.
The board supports redundant operation mode where the same stream is received or transmitted over a Primary and a Secondary Ethernet connector.
- Dante Interface Cards
- Musicrown
Musicrown – DMS DSP
- 32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
- 8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
- Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
- DSP input channel including noise gate, gain, mute, phase, link adjustment.
- DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
- All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
- All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
- Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
- Maximal delay time 680mS for all input/output channels.
- Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
- Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
- 30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
- PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
- Module power supply mode is DC9V-12V 1A.
- Module size is 100mmx66mmx40mm.
- DMS 2.0 - 2 analog input, 2 Dante output
- DMS 0.2 - 2 analog output, 2 Dante input
- DMS 2.2 - 2 analog input/output, 2 Dante input/output
- DMS 4.0 - 4 analog input, 4 Dante output
- DMS 0.4 - 4 analog output, 4 Dante input
- DMS 4.4 - 4 analog input/output, 4 Dante input/output
- Dante Interface Cards