Cart
← Back to Product Catalog

Alcorn McBride – V-Page VP4X

I/O Interfaces

More details

Similar Products

DIO1616MAXLRfb
  • CTP Systems

CTP Systems – DIO1616MA-XLR

The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. The unit operates at 48kHz and 96kHz and network connection may be copper and/or fibre and is PoE enabled. The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. Network connections may be copper and/or fibre via two SFPs and the unit includes connections for network redundancy. The DIO1616MA is PoE enabled so may be operated without a mains supply if required. All level control and phantom switching is adjusted using the built in web server. The unit operates at sample rates of 48kHz and 96kHz. The unit will also operate in AES67 mode. Power is PoE or mains 110-240 VAC 50/60Hz auto switching. Dimensions 2RU, 300mm deep.
    I/O Interfaces
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
PIC_CDT100_MK3_002
  • Clockaudio

Clockaudio – CDT 100 MK3

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transmission across a standard IP network. Based on high performance and pre-configurable hardware platform it guarantees perfect sound quality. The CDT 100 Mk3 has a variety of uses including but not limited to boardrooms, video and conference rooms, or any place else where multiple microphones and control devices are connected back to the AV equipment cabinet.

Features:

• Easy to install with under table mounting

• Dante Audio and control signals transported over standard IP network

• 4 audio inputs, with gain control, high pass filters and Phantom Power

• 2 line-level outputs with high pass filters

• Up to 6 units may be daisy chained

• 4 Touch Switch ports compatible with all logic enabled Clockaudio devices.

• Open API for interfacing with Control Systems

• Compatible with any Dante capable audio DSP

    I/O Interfaces
See the product
AU-X2IPRO-D
  • TiGHT AV

AU-X2OPRO-DA

The AU-X2IPRO-D/ AU-X2IPRO-DA from TiGHT AV effortlessly integrates two channels of analog audio into your Dante network. Utilizing Audinate’s original Dante Ultimo chip, the unit supports sample rates up to 96kHz.
    I/O Interfaces
  • Dante Ch: 2 In
  • 24-bit
See the product