ALF-DAI-2XLR

Product Information

The ALF-DAI-2XLR 2 channel analog to Dante input adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAI-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network.

Features:

Seamlessly integrate Dante systems into traditional analog systems.
There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
With 2 channels of analog input on XLR
POE(802.3af)

Specifications

Dante Output Channels: 2
Bit Depth: 24-bit
Sample Rate: 48kHz

Ferrofish – A32 DANTE

The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks. The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks. Alternatively, with an interconnection of two A32 DANTEs, a live recording on the computer of up to 64 channels is possible at any time. In this case, a separate sound card (such as, for example, when using the ADAT or MADI ports) is not necessary. The intuitive operating concept and the redundancy options, as well as the multiple submix and routing possibilities, make the A32 DANTE an ideal component of every DANTE interconnected system.

I/O Interfaces

See the product

MONISMS

MONISMS – MNS-AMPMC30XXA-2P

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

I/O Interfaces

See the product

Extron Electronics

Extron – AXI 02 AT

The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. This Dante Audio Interface provides two channels of audio output from the network to devices without Dante connectivity. It features two line level analog outputs on captive screw connectors with a mirrored two-channel S/PDIF output on a coaxial RCA connector. The AXI 02 AT interfaces with a Dante audio network over a standard local area network, and is powered through PoE. The AXI 02 AT includes a ZipClip® 100 Mounting Kit and is compatible with Extron Rack Shelves and ZipClip 200 mounting solutions.

I/O Interfaces

Dante Ch: 2 In
24-bit

See the product

ALF-DAI-2XLR

Product Information

Specifications

Similar Products

Ferrofish – A32 DANTE

MONISMS – MNS-AMPMC30XXA-2P

Extron – AXI 02 AT

Stay connected to Dante

Support

Company

Dante Networking Alliance