Cart
← Back to Product Catalog

Allen & Heath – DT20

I/O Interfaces

More details

Similar Products
  • AtlasIED

AZMP4-D

The Atmosphere AZMP4-D is a powered (600 Watt) 4-zone audio processor and the heart of an Atmosphere audio control system. Powerful DSP combined with innovative algorithms offer custom solutions for a wide variety of spaces. Dante networked audio provides convenient audio distribution to other Dante-enabled devices.

    I/O Interfaces
  • Dante Ch: 16x16
  • 24-bit
See the product
shure-ANI4OUT-XLR_600px
  • Shure

Shure – ANI4OUT-XLR

New ANI4IN and ANI4OUT devices can bring up to four wired microphones onto or from a Dante network for easy audio routing and browser-based connectivity. New ANI4IN and ANI4OUT devices can bring up to four wired microphones onto or from a Dante network for easy audio routing and browser-based connectivity. Both new Microflex Advance array microphones are fully digital for networked set-up, management and control on Dante™ networks.
    I/O Interfaces
  • Dante Ch: 4 In
  • 24-bit
See the product
ru-lb2_400px
  • RDL

RDL – RU-LB2

The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB2P operates from PoE. The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB2 is also available in a PoE version (RU-LB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
See the product