Cart
← Back to Product Catalog

Allen & Heath – SQ Dante V2 Card

Dante Interface Cards

More details

Similar Products

allen-heath-m-dl-adapt
  • Allen & Heath

Allen & Heath – M-DL-ADAPT

The M-DL-ADAPT interface fits in any dLive I/O port on MixRack or Surace and adds compatibility with most iLive/GLD audio networking cards, including M-Dante, M-waves, M-ES-V2, M-ACE and M-MADI. It provides a 64x64 channel interface running at 48kHz, thus maintaining compatibility with Allen & Heath iLive and GLD mixing systems as well as most third party consoles running off Dante or MADI. Sample conversion rate is seamlessly performed in the interface module.
    Dante Interface Cards
  • Dante Ch: 64x64
  • 48kHz
See the product
avid-mtrx-128-channel-ip-audio-dante-card
  • Avid

Avid – Pro Tools MTRX 128-Channel IP Audio Dante Module

Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz) Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz)
    Dante Interface Cards
  • Dante Ch: 128x128
  • 24-bit
See the product
  • RDL

RDL RN22

RDL has released a line of five single-gang Dante interfaces. The D Series-RN22 and D Series-RN2ML are 2x2 wall-mounted, bidirectional mic/line Dante interfaces, the D Series-RN12 is a 1x2 wall-mounted, bidirectional mic/line Dante interface and the D Series-RN02 is a 0x2 wall-mounted Dante interface. The fifth model – the D Series-BTN21 wall-mounted Bluetooth Dante interface – will be released soon. The models come with a variety of features that are said to help with installation and configuration, including network control of gain, attenuation, phantom power and channel summing, and additional rear-panel inputs and outputs on detachable wiring blocks. The units are available in multiple finishes including black, white and stainless steel. Custom labels can be created and ordered online, and the interfaces fit a standard US single-gang electrical box or can be used with the RDL EP-1 adapter for mounting in EU/UK back boxes. To support the Dante interfaces, the manufacturer has also added two network remote controls: the D-NMC1R and D-NLC1R. These single-gang wall-mounted controllers allow end users to control a wide range of parameters using a simple rotary knob, including volume, presets, muting and Bluetooth settings. Visual feedback is provided through LEDs on the D-NLC1R or an integrated full-colour LCD display on the D-NMC1R.
    Dante Interface Cards
  • Dante Ch: 2x2
  • 24-bit
See the product