Cart
← Back to Product Catalog

AMK – DS62-B-X

Speakers

More details

Similar Products

hedd-series-one-type-30_1200px
  • HEDD

HEDD – Series ONE Type 30

The HEDD Type 30 is an exceptional analog midfield monitor that will satisfy professional studio needs and desires. Like the entire HEDD studio monitor Series ONE it can be turned into a powerful Dante device (all you need is the HEDD B1-Dante input module).  The HEDD Type 30 is a non-compromise midfield monitor. The 3-way-system based monitor is an ideal player in bigger recording and broadcast studios as well as mastering houses. Two horizontally aligned 7”-woofers, 5”-midrange woofer, the HEDD Air Motion Transformer tweeter, and 4×300 watts amplification create a frequency range from 30Hz to 50khz. The sound of the Type 30 is supersolid and offers extremely high fidelity throughout the entire frequency range. As our two smaller studio monitors, the Type 30 offers XLR and RCA connections as well as a free input-card system that can hold a 2-channel B1-Dante module.
    Speakers
See the product
Amadeus_PMX_15D_1000px|Amadeus_PMX_15D_1000px
  • Amadeus

Amadeus – PMX 15 D

The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms. The PMX 15 D system hosts a coaxial driver with a 15-inch (38 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 15 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.  Each speaker channel is under control by a powerful, 64-bit digital processing unit capable of a 118 dB dynamic range. Each of these on-board DSP units include a module dedicated to managing core system parameters including system EQ, time alignment between sections, limiting, and transducer thermal protection. This level of control makes the PMX D Series fully protected and able to operate at the full extent of its abilities.
    Speakers
See the product
tannoy-qflex-32ls_0|tannoy-qflex-32ls_0
  • Tannoy

Tannoy – QFlex 32LS

The QFlex 32LS column loudspeakers are designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message.  The QFlex 32LS column loudspeakers are designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. These new QFlex life safety models are specifically intended to optimise voice reinforcement, and as a result make them more affordable, and therefore applicable, to a wider range of projects.  The QFlex 32LS contains a combination of 4-inch and 3-inch low frequency drivers, distributed over the equivalent length of the QFlex 48, and an eight-way tweeter array of 1-inch drivers. Each driver is individually powered by one of 32 discrete channels of integrated 100 Watt (RMS) Class D amplification and DSP.  The QFlex 32LS offers a horizontal dispersion pattern of 120 degrees and a vertical range of between 5 and 100 degrees, along with a beam steering range of ±70 degrees. Low frequency control is effective down to 200 Hz even with the fewer number and increased spread of drivers that are required for the power saving essential in the life safety environment
    Speakers
See the product