Cart
← Back to Product Catalog

Amphenol – RJD32U1-0050

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – TNT-1212D

The network audio processor is a network audio processor with 28 inputs (12 analog and 16 digital) and 28 outputs (12 analog and 16 digital). It adopts the industry-leading ADI DSP SHARC21489, the highest The working frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
    I/O Interfaces
See the product
cadac-mc-dante-network-bridge_600px
  • Cadac

Cadac – CDC MC Dante Network Bridge

The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The MC Dante also has on-board sample rate conversion for all 128 channels, as well as its own independent word clock with audio connections via co-axial. Dual PSUs come as standard to ensure secure performance in critical network applications. As with the CDC MC MADI unit, the co-axial ports glow either red or blue for Rx (receive) or Tx (transmit) – enabling fast and accurate configuring of the MegaCOMMS network especially in low light.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
Dante官网logo
  • BARE

BARE – DP-8

Features： 1. The frameless design of the mesh cover makes it fit the wall and ceiling better; 2. The network cable realizes signal transmission and power supply; 3. Automatically assign IP address through router DHCP; 4. Each receiving channel can be controlled independently, and can be applied to any location in the local area network 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 6. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
  • 24-bit
  • 44.1kHz-48kHz
See the product