AMX - DGX6400-ASB-DAN

Product Information

The DGX6400-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 6400 enclosure.

The DGX6400-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 6400 enclosure. The boards support 16 discrete stereo decoded inputs and 16 discrete stereo encoded outputs. This allows for independent routing of decoded inputs, or breakaway to decoded audio outputs, into a networked audio system such as HARMAN’s BSS. Additionally, the kits feature audio breakaway, downmixing, and a host of DSP functionality such as EQ, volume control, and stereo summing on every path

Features

Direct Dante Integration into the Enova DGX – Reduces the physical installation time for inserted and extracted audio paths from the Enova DGX system as Dante network enabled signals
Easy Integration with Dante Enabled Devices including HARMAN BSS and Crown – Allows for simple decision making when specifying companion DSP to the Enova DGX switching solution
Simplified Integration with Building-Wide Audio – Utilizing Dante, the industry’s most standard networked audio format, integration of traditional Centralized AV and networked audio is quick and easy
Audio Breakaway Switching – audio breakaway switching functionality allows for flexible combining of audio and video signals even if they originated from different sources
Integrated DSP Including a 10-Band Parametric EQ on Every Output – Audio equalization allows the sound in each zone to be tuned specifically to match the individual audio characteristics of each environment. After easy setup with the integrated web GUI, the same audio source can be heard perfectly in each zone regardless of acoustical differences.

Specifications

Dante Ch: 32x32
Sample Rate: 48kHz

Musicrown

Musicrown – DMS DSP

Musicrown's DMS DSP is a Dante interface card. Musicrown's DMS DSP is a Dante interface card.

32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
DSP input channel including noise gate, gain, mute, phase, link adjustment.
DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
Maximal delay time 680mS for all input/output channels.
Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
Module power supply mode is DC9V-12V 1A.
Module size is 100mmx66mmx40mm.

DMS Series:

DMS 2.0 - 2 analog input, 2 Dante output
DMS 0.2 - 2 analog output, 2 Dante input
DMS 2.2 - 2 analog input/output, 2 Dante input/output
DMS 4.0 - 4 analog input, 4 Dante output
DMS 0.4 - 4 analog output, 4 Dante input
DMS 4.4 - 4 analog input/output, 4 Dante input/output

Dante Interface Cards

See the product

Adam Hall Group

Adam Hall – LD Systems X-EDAI

With the X-EDAI Ethernet & Dante Audio Interface expansion card, LD Systems complements the possibilities of the X-ECI Ethernet Control expansion card with a Dante Audio Interface with four inputs and outputs. Thus, X-EDAI offers both remote control and access to the DSP settings of LD Systems IPA DSP installation power amplifiers as well as easy integration of the IPA series into existing Dante audio networks.

In conjunction with LD Systems QUESTRA® software, the X-EDAI interface card provides flexible and effective configuration and control of fixed audio installations of various sizes - whether in hotels, restaurants, shopping centres, sports facilities, office environments and more.

The X-EDAI Ethernet Control expansion card has two IP network ports: While the 100 Mbps Ethernet port provides control and DSP access for the IPA installation power amplifiers, the second port can be used to transmit and receive four incoming and four outgoing Dante audio channels. The configuration and routing of the Dante audio channels is done as standard in the Audinate Dante Controller software.

Furthermore, the X-EDAI expansion card has a status LED and an IP reset button for quick and easy troubleshooting. Thanks to the card's asymmetrical pin arrangement, accidental incorrect installation of the interface card in the IPA housing is impossible.

Via the QUESTRA® software, system integrators can access all DSP settings of the IPA installation power amplifier. The possibilities range from signal processing at the input (preamp, compressor, etc.), signal flow in the matrix mixer, output processing (EQ, dynamics, delay, polarity, mute) to priority settings and preset management. In addition, customised control panels can be created in the QUESTRA® software, which can be used by end customers on smartphones, tablets or computers (via the QUESTRA® Panels app) for convenient control of their system.

Dante Interface Cards

Dante Ch: 4x4

See the product

KS Audio

KS Audio – D Mod

The 4-channel loudspeaker controller module with digital signal processing for amplifiers of the KS AUDIO series

CA 4D and TA 4D. A unique convincing solution for perfect sound and easiest handling. The KS D MOD controller module complements the F MOD modules for applications where no quick change of the loudspeaker systems is required - i.e. especially in the installation area.

The one-time configuration of the loudspeaker system is done on the module by a USB stick transmitting the data while the system is switched on. During that process, both the signal inputs and the power outputs automatically receive the correct function:

from four individual channels

via two channels in Bi-Amp

or high-power bridge mode

to a single-channel 3-way active loudspeaker system with woofer-bridge mode output, and optionally “BI-Amp” control.

a SAT mode is also available in which the L+R signal is summed up to mono sub-low.

In addition to digital signal processing with FIR filter tech- nology, the special feature of the D MOD is its complete operability and controllability via standard networks. An integrated gigabit switch allows daisy-chaining to the next device. The KS REMOTE PC software enables easy ma- nagement and graphically, easy to understand, operation of an unlimited number of controller amplifiers arranged in groups.

All inputs can be controlled either digitally or analogously. Simultaneous digital and analog operation is also possible. A network-audio transmission using DANTETM protocol is available as an option.

Despite the many new possibilities and state-of-the-art technology, the D MOD can replace an existing analog or digital controller by simple front-panel installation. This puts your public address system back on the cutting edge of technology.

Dante Interface Cards

See the product

AMX – DGX6400-ASB-DAN

Product Information

Specifications

Similar Products

Musicrown – DMS DSP

Adam Hall – LD Systems X-EDAI

KS Audio – D Mod

Stay connected to Dante

Support

Company

Dante Networking Alliance