Cart
← Back to Product Catalog

AMX – DGX6400-ENC

I/O Interfaces

More details

Similar Products

arista-ars-0200-a00
  • Arista

Arista – ARS-0200-A00

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

  • E-Vocal ARS-0002-A00
  • E-Vocal ARS-0002-A01
  • E-Vocal ARS-0200-A00

E-Vocal ARS-0200-A00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog input to be integrated into a Dante ® network. It's AES67 compliant and provides high resolution 24 bit analog to digital conversion. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

    I/O Interfaces
See the product
rdl-dds-bn40_1200px_0|rdl-dds-bn40_1200px_0
  • RDL

RDL – DDS-BN40

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product
alcorn-mcbride-VP12X
  • Alcorn McBride

Alcorn McBride – V-Page VP12X

The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room. Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate.  That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense. The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room.
    I/O Interfaces
See the product