Cart
← Back to Product Catalog

AoIP22 MKII

I/O Interfaces

Learn more

Similar Products

Dante官网logo
  • BARE

BARE – DE-6

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
leonis-AES367
  • Leonis Cinema

Leonis Cinema – AES367

AES367 is a bridge between AES/EBU and AOIP, it can convert 16-channel AES/EBU balance input into AES67 signal and reversely. AES367 is a bridge between AES/EBU and AOIP, it can convert 16-channel AES/EBU balance input into AES67 signal and reversely. It supports 32 kHz to 192 kHz sample rate, and the sample depth can reach up to 24 bit. It has a very low jitter clock recovery mechanism ,and the data is in accordance with AES3 and AES67 interface standard.
    I/O Interfaces
See the product
monacor-international-dtra-2
  • Monacor

Monacor – DTRA-2

The DTRA-2 is a Dante I/O box, for converting Dante streams into analogue audio signals.  The DTRA-2 is a Dante I/O box, for converting Dante streams into analogue audio signals. 
  • 1 x Dante™ input (EtherCon/RJ45)
  • 1 x aux input (3.5 mm stereo jack)
  • 2 x audio output (XLR, bal.)
  • 1 x monitor output (3.5 mm stereo jack) 
  • Output adjustable via recessed potentiometer (0-15 dBu)
  • Individually switchable noise generator for the outputs
  • Encoding/decoding: 16/24/32 bits
  • Sample rates: 48/88.2/96 kHz
  • LED indication for level control, PoE, external power supply and link
  • Metal housing
  • Power is provided via PoE or optional power supply
  • Dimensions: 81 x 45 x 153 mm
  • Weight: 400 g
    I/O Interfaces
See the product