Cart
← Back to Product Catalog

Apogee –  Symphony I/O Mk II Connect 8×8 MP

I/O Interfaces

More details

Similar Products

VE66DTH_Photo
  • ATEN

ATEN – VE66DTH

ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network. Key features include:

  • Features Dante™ networked audio interface – a complete audio networking solution that distributes uncompressed, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
  • Integrates up to 6-channel balanced mono audio Line/Mic input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
  • Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
  • Supports HDMI 2.0 input with HDCP 2.2 compliant & HDMI 2.0 local output
    I/O Interfaces
See the product
calrec-hydra2_800px|calrec-hydra2_800px
  • Calrec

Calrec – Hydra2

Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location.  Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location. Hydra2 does not compromise audio quality, performs with negligible latency and is founded on comprehensive, built-in fault detection and redundancy. Many of the world’s most successful broadcasters rely on Hydra2 infrastructure for live on-air application in both fixed and mobile installations every day. At the heart of Hydra2 is the 8192² Calrec router (4096² on Summa and Artemis Light). Networks become more advanced when multiple routers are connected together to add additional mixing consoles, or to increase the amount of I/O connections available. Routers, mixing consoles and I/O can all be easily connected to the network as and when needed. Hydra2 provides 1-to-n routing; input sources may be routed to any number of destinations in mixed formats, removing the need for external splits, distribution amplifiers and format convertors. Sources can be routed to multiple consoles, to multiple DSP inputs on each console and directly to output destinations all at the same time. I/O units connect to a Hydra2 router via a single Cat5e or fibre link and can carry 512 channels of 24 bit 48KHz audio in each direction simultaneously, along with control and error detection data. Bandwidth between routers can be increased in multiples of 512 channels by adding additional Hydra2 links between them. As with all Calrec products, audio quality and product reliability are our top concerns. All analogue pre-amps and line level paths are designed around our well proven and highly respected circuitry, providing very high headroom with a very low noise floor. Our lossless proprietary network transportation protocol does not compromise the high audio quality and maintains minimal latency.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
RedNet_D16R_MkII_front_HR
  • Focusrite

Focusrite – D16R MkII

The RedNet D16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.

Various connection options make RedNet D16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.

Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.

    I/O Interfaces
  • Dante Ch: 16x16
  • 24-bit
See the product