Cart
← Back to Product Catalog

AtlasIED – IED1581NA-D

Amplifiers

More details

Similar Products

img1-5
  • AllDSP

ALLDSP – SMA-6P2408

The SMA-6P2408 is a powerful System Amplifier with four analog inputs, two AES3 inputs, two Dante inputs, six outputs (2x2400W + 4x800W @ 4 Ohms), 10 PEQ bands per input and output and a frequency range up to 40kHz. The rugged analog input stage accepts input voltages of up to +23dBu thus matching any source on the market today, with an excellent dynamic range of 118dB. Using a switch-mode power supply for clean power supply rails and superior ruggedness, 64-bit digital processing and some of the best converters available on the market today, the SMA-6P2408 offers sound quality that sets standards in professional as well as high-end home audio.

    Amplifiers
See the product
Ashly_-_nXp_1504_0
  • Ashly Audio

Ashly – nXp1504d

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 4 Out
See the product
500553_AFR_Small_v2-600x402
  • Muxlab

Muxlab – Dante 2-Channel Power Amplifier 240W

The Dante 2-Channel Power Amplifier 240W (Model 500553) features a Dante slot card that accepts the digital signal from the Dante network and converts it to an analog audio signal using it as the input source of the amplifier. Simply use “Dante Controller” to route a signal from source devices that are on the same Dante network. Its space-saving 1/2 rack design allows for quick installation and provides flexibility to mix and match with other 1/2 rack products to save valuable equipment rack space. This powerful class D amplifier is combined with features such as 12V trigger control, audio-sensing, volume gain adjustment, short circuit protection and overheating protection.
    Amplifiers
  • Dante Ch: 2 In
  • 16-bit, 24-bit, 32-bit
See the product