AtlasIED – IED5400ACS


More details

Similar Products

ru-lb2p_400px|ru-lb2p_400px
  • RDL

RDL – RU-LB2P

The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB2P operates from PoE. The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB2 is also available in a PoE version (RU-LB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
DIO1600-XLRbr
  • CTP Systems

CTP Systems – DIO1600

The DIO1600 is a Dante enabled interface converting sixteen analogue line level inputs and sixteen analogue line level outputs to the audio network. All inputs and outputs have adjustable gain from +12dB to -12dB. The XLR version may be specified with XLRs on the front, network connections on the rear or XLRs on the rear, network connections on the front. It can also be supplied in a 1RU format with Tascam standard audio connections similar to the DIO1616MA below. Network connections may be copper and/or fibre via two SFPs and the unit includes secondary ports for network redundancy. The DIO1600 is PoE enabled so may be operated without a mains supply if required. The unit also has a 100-240V AC mains inlet and also supports 12 volt operation so may be effectively used with a redundant power supply. All level controls are adjusted using the built in web server. The unit will operate at sample rates of 48kHz and 96kHz and may also be used in AES67 mode.

    I/O Interfaces
  • Dante Ch: 16x16
  • 48kHz-96kHz
Core_X20r
  • Q-SYS

Server Core X20r

Features & Benefits
  • 384 x 384 networked audio channels (Q-LAN / AES67)
  • 128x AEC channels @ 200 ms
  • Includes 8 x 8 Software-based Dante channels (licensable up to 256 x 256)
  • Dual redundant, hot-swappable power supplies
  • Supports up to sixteen (16) Q-SYS NM-T1 tabletop microphone
  • Up to 64 VoIP softphone instances
  • 96 x 96 Media/WAN channel capacity
  • 16 multitrack playback channels (up to 256 with optional stackable feature license)
  • 4 multitrack record channels
  • Two (2) gigabit Ethernet ports for redundant networked audio
  • Two (2) independent, gigabit auxiliary Ethernet ports for segregation of network services such as VoIP, SNMP, LLDP, LDAP and WAN Media streaming
  • Onboard 480 GB media drive
  • 1 RU form factor
    I/O Interfaces
  • Dante Ch: 8x8
  • 24-bit