Cart
← Back to Product Catalog

Attero Tech by Q-SYS – unD6IO

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – DC-34

Features： 1. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications; 2. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 3. The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker, the voltage and current at both ends of the speaker on the PC side. 4. The sound column is made of wooden box body, sandblasted surface treatment, the sound is loud and powerful. 5. Automatically assign IP address through router DHCP; 6. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
  • Flock Audio

Patch LV

Key Features:
  • 64 Point Connections (Total)
  • (8 Inputs / 8 Outputs - DANTE Enabled Connections) 192 kHz / 32 Bit
  • (24 Inputs / 24 Outputs - Fully Analog PATCH Series Routing)
  • DB-25/D-SUB Tascam Standard Pinout Format Connectors (24 Ins x 24 Outs)
  • PATCH APP Routing Software (OSX & Windows)
  • Create, Store & Recall Routings in Seconds
  • Create Complex Multing Combinations w/ No Impedance Issues
  • No AD/DA Conversion, 100% Transparent Analog Signal Path (24 Ins x 24 Outs)
  • Patented Flock Audio Matrix Technology (24 Ins x 24 Outs)
  • Multiple Unit Expansion via DANTE for Larger I/O Systems
  • External 5Pin 24VDC Locking Power Supply w/ IEC Cable Included
  • Threaded Locking USB Connector w/ 10 Ft. - USB 2.0 (USB-A to USB-B) - Cable Included
  • Unit Dimensions: 1U - 1.75”(H) x 19” (L) x 8” (D) - 15 lbs
  • Est. Shipping Q3 - 2025
    I/O Interfaces
  • Dante Ch: 8x8
  • 32-bit
See the product
fp-nml2p
  • RDL

RDL – FP-NML2P

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product