AudioPressBox - APB-D200 R-D

AudioPressBox – APB-D200 R-D

Product Information

APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths.

APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network. As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

APB-Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

Kramer – FC-404NET

FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network. FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.

I/O Interfaces

Dante Ch: 4x4
44.1kHz-96kHz

See the product

Studio Technologies

Studio Technologies – Model 5204 Dual Line Input to Dante Interface

The Model 5204 Interface is a general-purpose audio device that supports applications utilizing the Dante® Audio-over-Ethernet media networking technology. Two 2-channel ("stereo") analog line-level audio signals can be connected to the Model 5204 and then converted to two channels on an associated Dante connection. The Model 5204 Interface is a general-purpose audio device that supports applications utilizing the Dante® Audio-over-Ethernet media networking technology. Two 2-channel ("stereo") analog line-level audio signals can be connected to the Model 5204 and then converted to two channels on an associated Dante connection. Analog audio signals connect to line input A by way of a 3-conductor ("stereo") 3.5 mm jack. This allows the direct interfacing of signals from a variety of sources such as personal audio and multimedia players, smartphones, and personal computers. These signals typically have an average (nominal) signal level in the range of –20 to –10 dBu. Line input B supports connection of balanced analog audio signals using two XLR connectors. Average signal levels for these types of signals are typically in the range of 0 to +4 dBu. Key Features

Dante audio-over-Ethernet technology
Two line-level inputs to Dante outputs
Audio channel level metering
Excellent audio quality
PoE powered
USB dedicated charging port with auto-mode selection
Standard connectors; compact, lightweight design

I/O Interfaces

Dante Ch: 2 Out
24-bit

See the product

Just Add Power

Just Add Power – VBS-HDIP-767DSS

The Just Add Power 3G+ Dante® Sound System Transmitter adds compatibility with Dante® and AES67 audio networks to the UltraHD over IP system.

Input up to 8 channels into the Dante® network. Extract up to 8 channels from the Dante® network, embed onto the HD over IP signal, and distribute across the Just Add Power network. Mix-and-match! The 3G+ Dante® Sound System Transmitter is fully compatible with all 2GΩ/3G and 3G devices. Not just for Dante®. AES67 compatibility for interoperability with other leading audio-over-IP technologies.

Datasheet

I/O Interfaces

See the product

AudioPressBox – APB-D200 R-D

Product Information

Similar Products

Kramer – FC-404NET

Studio Technologies – Model 5204 Dual Line Input to Dante Interface

Just Add Power – VBS-HDIP-767DSS

Stay connected to Dante

Support

Company

Dante Networking Alliance