Cart
← Back to Product Catalog

AZMP8-DW

I/O Interfaces

Learn more

Similar Products

Dante官网logo
  • BARE

BARE – PE-66

Features： 1. Easy to install, low cost, less noise; 2. No need to cut the ceiling panel or insert the bottom box on the back, directly replace the original gypsum board 3.60X60 flat panel design, can be personalized inkjet pattern 4. With 360° sound field coverage, it can emit high-fidelity and clear sound; 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 6. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications. 7. Automatically assign IP address through router DHCP; 8. It can independently control each receiving channel, and can be applied to any location in the local area network 9. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 10. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
fp-nml2vp_400px
  • RDL

RDL – FP-NML2VP

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.
    I/O Interfaces
See the product
AVN-DIO03
  • Sonifex

AVN-DIO03

The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. The D/A circuitry offers >120dB of dynamic range, audiophile quality. The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network. The D/A circuitry offers 120dB of dynamic range - ten times better than similar competing products. All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.
    I/O Interfaces
  • Dante Ch: 2 In
  • 16-bit, 24-bit, 32-bit
See the product