Barco – PDS-4K


More details

Similar Products

  • TiGHT AV

TNET-ENC-H101-DA Encoder

The TNET-ENC-H101-DA is a versatile encoder that offers a suite of advanced features for today’s AV environments. The T-NET-ENC-H101-DA is equipped with 4K60 1G Ethernet with subframe latency, making it ideal for streaming high-resolution content over a network. It also features dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding. To make installation and troubleshooting easy, the T-NET-ENC-H101-DA is equipped with a built-in LED display that provides information such as IP address. It also offers a variety of management and control options, including a built-in WEB UI for configuration and setup, an open direct-control API, compatibility with Dante Controller & Dante Domain Manager, and proprietary software for management and mass deployment. Key Features: · 4K60 1G Ethernet with subframe latency · Dual LAN ports with PoE/PoE+ pass-through · VLAN tagging support · USB host port · HDMI loop output · Audio embedding/de-embedding · 2x2 CH Dante Audio break-in/out · LED display for easy installation and troubleshooting · Video Wall up to 16x16 with Mosaic configuration support · USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode · Built-in WEB UI for configuration and setup · Open direct-control API · Compatible with Dante Controller & Dante Domain Manager · Proprietary software for management and mass deployment
    AV Encoders & Decoders
  • Dante Ch: 2x2
  • Dante AV Enabled
  • Tieline the Codec Company

Tieline Gateway

The Gateway is a DSP-based IP codec which can transport 16 channels across the public internet and any QoS-enabled IP network. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 16 full-duplex audio channels as well as multiple unicasting to 80 endpoints and multicasting. Transport of phase-locked multichannel audio in 5.1 or 7.1 formats is also supported. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or
    AV Encoders & Decoders
  • Dante Ch: 8x8
  • 24-bit
ZeeVee_ZyPer4K_AV_decoder_BACK_800px
  • ZeeVee

ZeeVee – ZyPer4K

ZyPer4K AV decoder with an integrated Dante transmitter: Equipped with Dante technology, the ZeeVee ZyPer4K decoder will enable users to route any audio source within a ZyPer4K deployment to a Dante network. ZyPer4K AV decoder with an integrated Dante transmitter: Equipped with Dante technology, the ZeeVee ZyPer4K decoder will enable users to route any audio source within a ZyPer4K deployment to a Dante network. Dante audio over IP includes support for features such as “human” readable names for all connected devices, automatic device discovery, one-click routing and low deterministic latency. In addition, it provides stable performance and enables automatic reconnection of system components after power cycles. Like all Dante devices, the Dante transmitter found in the ZyPer4K decoder is managed by the Dante Controller application. This virtual patch panel provides for the convenient connecting of devices, clocking, sampling control and the ability to manually choose between unicast and multicast signal distribution. Audio from any ZyPer4K encoder can be routed directly to a ZyPer4K decoder and inserted onto the Dante network via the embedded Dante transmitter.
    AV Encoders & Decoders