BARE - G-10AD

BARE

BARE – DCS-200C/D

Features： 1. Adopting all-digital conference technology, in line with IEC60914 international standards; exquisite and minimalist structure design, highlighting the modern atmosphere, in line with ergonomics; special electret capacitive dual microphone core design, clear sound quality, high sensitivity; 2. The self-developed technology of D-net IOT digital conference IOT system realizes five adjustable directional modes of pickup microphones: omnidirectional, cardioid directional, super-cardioid directional, sharp-heart directional, Figure- 8-pointing type; 3. The exquisite and elegant 3.5-inch touch screen is used for the information interaction between the speaker and the conference manager, and can display the following information at the same time: a. Speaker information and time b. Microphone directivity setting c. Sign in and observe the voting status d, microphone gain adjustment e. Information interaction between the speaker and the conference administrator f. System language setting and unit information display 4. Ring-shaped hand-in-hand connection technology, the failure or replacement of a microphone will not affect the work of other extensions of the system, and a connection failure between the microphones will not affect the system work, thus making the system more reliable; 5. Support line "hot swap", microphone access system can be added at any time 6. With the camera tracking host, after using the computer preset, the camera can be automatically tracked The 7.3.5-inch wall control touch screen is used for conference host management and settings, which is convenient and efficient, and can display the following information at the same time: a. Time-limited mode: The speech time limit can be set to 1-60 minutes, and the speech will be automatically closed when the time is up. After reaching the power-on quantity, when another representative unit wants to speak, it will automatically enter the request-to-speak registration queue. b. First-in-first-out mode: First-in-first-out speaking mode (factory preset position), after reaching the number of power-on, the speaking unit opened first is closed by the subsequent speaking unit. c. Application for speaking mode: the speaking of the representative unit needs to be approved by the chairman unit or the operator. In this mode, the chairman unit always keeps the normally open state. 8. Two-color LED indicator light, green when speaking; 9. The unit comes with a 1.8-meter conference dedicated 8-core cable, and a 1-meter analog backup audio cable (with a T-Nong head) 10. Anti-RF microphone core of mobile phone, stable connection, durable and reliable; 11.1 Ø 3.5 mm stereo headphone jack can be connected to headphones. The conference unit has a unique serial number, and the conference system can manually assign an ID to the conference unit.

I/O Interfaces

See the product

RDL

RDL – DDB-BN31

The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. The Mini-jack left and right inputs are each converted to a separate Dante network transmit channel. Each input provides a network digital audio level of -18 dBFS for an unbalanced -10 dBV input. The input is equipped with a selector to sum the left and right Mini-jack inputs. The summed signal feeds both Dante transmit channels. Two Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -18 dBFS. The left and right Mini-jack channels are normally fed from Dante receive channels 3 and 4 (stereo). The Mini-jack output is equipped with a selector to feed both output channels from Dante receive channel 3 (mono). This selector may be set from the front of the unit when the cover plate is not installed. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN31. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN31 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN31 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN31’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

Glensound

Glensound – AoIP44

The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs. As well as being mains powered with the standard signature backup DC powering option, the AoIP44 can be powered from an external PoE source via its network interface. The AoIP can be used as a simple low cost audio I/O break out unit on a large Dante audio network where it can be integrated extremely easily using the Dante controller and is fully compatible with any manufacturers Dante equipment. It can also be used in very simple audio over IP scenarios where just 4 bi-directional audio circuits are needed to be distributed across a buildings network infrastructure, in which case 2 x AoIP44 units can be used connected together across the network. The AoIP44 is equally suited for high integrity broadcast purposes, intercom, just simple paging facilities or simple distribution of non-critical audio. Being part of our Signature Range the AoIP44 comes as standard with removable rack ears (to allow front or rear mounting in 19" racks), mounting holes to allow under desk mounting (the holes are equally suited for screwing the unit into odd places!) and an optional external DC power supply for applications requiring redundant power supplies. It is housed in an all anodised aluminium chassis.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

BARE – G-10AD

Product Information

Similar Products

BARE – DCS-200C/D

RDL – DDB-BN31

Glensound – AoIP44

Stay connected to Dante

Support

Company

Dante Networking Alliance