Product Information
The TD-102D is a wireless microphone system utilizing UHF and Dante network transmission.
Similar Products
- Sonifex
Sonifex – AVN-AIO8
AVN-AIO8 is a multi-channel Dante® Audio interface, which provides 8 balanced analogue inputs and outputs to and from the Dante network.
AVN-AIO8 is a multi-channel Dante® Audio interface, which provides 8 balanced analogue inputs and outputs to and from the Dante network. Simple to configure and operate, these cost effective rack-mount solutions offer an easy solution for AV professionals and system integrators. Packaged in a 1U form factor, they use Neutrik XLR connectors, are Dante® AES67 compliant and use PoE for power.
- I/O Interfaces
- Dante Ch: 8x8
- 16-bit, 24-bit, 32-bit
- BARE
BARE – LA-AM12D
The
LA-AM12D compact line array module with its own power amplifier has a
high-energy 12-inch ultra-low frequency unit with continuous directional
coverage. Designed for simple system construction, it can provide the best
listening experience in the shortest time. At the same time, the entire
series is fully integrated with DanteTM. Using the speaker as the system
carrier, it fully integrates the functions of signal transmission,
processing, power amplification and remote monitoring, abandoning a large number
of physical devices such as power amplifiers and peripheral processing
equipment, and realizes the system transmission network, processing IT, and
control intelligence.
- I/O Interfaces
- DAD
DAD – DX32R
DX32R is your versatile digital audio Swiss knife - an interface and matrix designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distribution installations. It allows you to route all digital input and output and manage them on a mono channel basis within a single unit or a combination of units.
With near zero latency, the DX32R can be used to expand I/O channel count and interface digital components, providing a high quality bridge between AES/EBU, MADI and the Dante IP audio network.
DX32R include a 384x384 multiplexer, enabling all digital inputs and outputs to be routed in any combination; this enables the unit to also split signals for advanced signal distribution.
The DX32R IP Audio protocol is based on the robust tried-and-tested Dante™ digital audio network technology, and will interoperate with products of other brands that comply with Dante.
The protocol is compliant with the AES67 standard for AoIP. The Dante and NTP IP Audio formats provide fast, flexible, and economical audio routing via IP and are compatible with the AX32 AD/DA converter, and other Dante devices. The IP Audio routing provides low latency, tightly synchronized, transport of uncompressed audio over Gigabit IP Ethernet Layer 3 networks using off the shelf switches, and routers for audio routing via one or more sub-nets.
A total of 512 channels can be routed on a 1 Gigabit network, and more if the network capacity is higher.
DX32R is TCP/IP controlled via one of the two Ethernet ports vi the DADman Control software available for both Windows and OSX.
The routing of the IP audio via Dante is done by using the Audinate Dante controller software.
- I/O Interfaces
- Dante Ch: 64x64
- 24-bit