Bose – ControlSpace ESP-1600


More details

Similar Products

arista-ars-0002-a00
  • Arista

Arista – ARS-0002-A00

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

  • E-Vocal ARS-0002-A00
  • E-Vocal ARS-0002-A01
  • E-Vocal ARS-0200-A00

E-Vocal ARS-0002-A00 converts a Dante ® stream into two channels of analog audio output signals. It's AES67 compliant and provides high resolution 24 bit analog to digital conversion. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

    I/O Interfaces
AMX-DGX800-ENC_1200px
  • AMX

AMX – DGX800-ENC

The new Enova DGX 800 Enclosure (DGX800-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. The new Enova DGX 800 Enclosure (DGX800-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. This robust solution includes a NetLinx® NX Integrated Controller, redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio -switching boards. There are four connections per video board, and each enclosure holds two video input boards and two video output boards for a maximum matrix of 8x8. The Enova DGX 800 adds several new capabilities such as automatic setup of DXLink endpoints, single IP addressing for multiple endpoints, and a new web interface to greatly simplify installation and configuration. The new advanced Audio Switching Boards add audio breakaway capabilities and parametric EQ on each DGX output. The Enova DGX 800 is far beyond a modular media switcher with built-in controller - it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro® Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment – all from a single point of control. In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Built-in SmartScale® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time – regardless of signal type. As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and Fiber Transmitters/Receivers.
    I/O Interfaces
0114755_unterputzanschluss-mit-xlr-input-female-auf-d
  • promedias

promedias – proDT XI UP

Flush-mounted connection with XLR Input female to Dante, EDIZIOdue

  • AES67 & DDM ready!
  • 1x0 LINE IN (XLR female)
  • PoE / 5VDC Input DANTE® Broadway
  • Sample Rate: max. 192kHz | Latency: min. 0.25ms
  • Network Speed: 1Gb/s / 100Mb/s
  • Dimensions: Gr. I (1x1) - 88x88x72mm bzw. 67mm
  • Installation dimensions: Ø64x60mm bzw. Ø60x60mm (cutout x depth)
  • Color: white (Feller 61), similar to RAL 9010 (also available as standard, e.g. black 60 or option RAL/NCS colour!)
    I/O Interfaces