Cart
← Back to Product Catalog

Bose – ControlSpace ESP Dante

Dante Interface Cards

More details

Similar Products

MDT44-E2|IMG_2662
  • Kingray

Kingray – MDT44-E2

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

    Dante Interface Cards
See the product
mx2m-aux-dante-32ch
  • Lightware

Lightware – MX2M-AUX-DANTE-32CH

MX2M-AUX-DANTE-32CH is a Dante and AES67 compatible input and output board for the MX2M modular matrix family. The hot-swappable IO board is seen as two distinct Dante devices from the Dante network.

Each Dante card can simultaneously send and receive 16 mono audio channels from the Dante network it is connected to via its 1GbE connectors. This makes the board capable of sending and receiving 2 x 16 mono audio channels from the same or different Dante domains with the same or different sampling frequencies.

The received audio is made available to all video and audio outputs over the audio layer of the matrix as LPCM audio streams. Similarly, the audio sent to the Dante network can originate from any of the video or audio inputs of the matrix carrying LPCM audio.

The board supports redundant operation mode where the same stream is received or transmitted over a Primary and a Secondary Ethernet connector.

    Dante Interface Cards
See the product
  • RME

HDSPe AoX-D

The HDSPe AoX PCIe x4 audio interface cards combine dual network ports with headphone output, AES3, MIDI, and internal expansion headers for up to four MADI ports. Whether used in a Thunderbolt™ expansion chassis or built into DAWs or audio processors, these cards send and receive up to 512 channels of audio and provide numerous mixing and routing capabilities.

The vast number of channels can be managed by the user in two steps. Using a driver dialog or web interface, the user first adjusts the network vs. optional MADI channel count, and then pre-selects which inputs reach the 256 channel TotalMix engine. The remaining 256 channels are passed straight through. All 512 channels are visible to the DAW for recording. TotalMix offers its basic functionality without effects, but with all the great benefits such as presets, layouts, loopback, sub-mixes, and many more.

    Dante Interface Cards
  • Dante Ch: 512x512
  • 24-bit
See the product