Cart
← Back to Product Catalog

Bose – PowerMatch PM4500 / PM4500N

Amplifiers

More details

Similar Products

powersoft-ottovanali_base
  • Powersoft

Powersoft – Ottocanali 12K4 DSP+D

The Ottocanali 12K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 12,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems. As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption. With two redundant Dante by Audinate digital streams, the Ottocanali 12K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.
    Amplifiers
  • Dante Ch: 16x8
  • 24-bit
See the product
Crest_Audio_CKd_608_Front_03611440
  • Crest Audio

Crest Audio – CKd 608

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
    Amplifiers
  • Dante Ch: 8x8
See the product
Kevic_-_MA3232|Kevic_-_MA3232
  • Kevic

Kevic – MA3232

The Kevic MA3232 is a Dante Digital Power Amplifier.   The Kevic MA3232 is a Dante Digital Power Amplifier. Features:
  • In/out Channels:2XLR Balance with Link Ouputs
  • Rated Output Power :2 X 1600Watts 4 ohms
  • Power Band Width:10Hz-28KHz
  • Input Sensitivity:+4dBu(1.2Vrms)
  • THD at Rated Power: 0.05%
  • CrossTalk : Less Than 80dB
  • Signal to Noise Ratio: more than 104dB
  • Network audio Format : Dante BK2
  • Demansions,mm:482 x 88 x 432
  • Weight : 17Kg
    Amplifiers
See the product