Cart
← Back to Product Catalog

Calrec – RP1

I/O Interfaces

More details

Similar Products

A164D_WALL_DanteLogo_3
  • DiGiCo

DiGiCo – Dante A164D WALL LCD

The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.

    I/O Interfaces
  • Dante Ch: 16 In
  • 24-bit
See the product
yamaha_rmio64d_front-rear|yamaha_rmio64d_front-rear
  • Yamaha

Yamaha – RMio64-D

The RMio64-D remote rack enables audio from a Yamaha CL or QL console to be converted to MADI and fed to an OB vehicle, for example, or a MADI based console can be easily integrated into a NUAGE system for post production. The RMio64-D remote rack enables audio from a Yamaha CL or QL console to be converted to MADI and fed to an OB vehicle, for example, or a MADI based console can be easily integrated into a NUAGE system for post production. Word clock synchronization can be an issue when converting between different audio formats, but with The RMio64-D MADI built-in inputs and outputs built-in eliminate the problem of word clock synchronization when converting between different audio formats. Sample rate conversion sources with differing word clocks can be connected without causing noise or dropouts. In addition to redundant Dante network connections, the RMio64-D also supports MADI redundancy through simultaneous coaxial and optical connections. With the MADI Split (loopback) capability, a signal received at either the coaxial or optical input can now be retransmitted to the output.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
neutrik-xirium-pro-nxp-tx-dante|neutrik-xirium-pro-nxp-tx-dante
  • Neutrik

Neutrik – NXP-TM-DANTE

This product has reached End of Line and is discontinued. The NXP-TM-DANTE module allows the XIRIUM PRO NXP2TX base to send the signal from a Dante network wirelessly to an RX base, providing the highest possible sound quality, reliability, and outstanding performance in one unique solution. With XIRIUM PRO Neutrik introduces a new, innovative product, allowing for easy adoption of DiWA technology. With just two devices, namely the transmitter (TX) and the receiver (RX), audio transmission can be established quickly, and more cost effectively then using traditional audio cables or other wireless systems. Engineers, artists, and project designers can now think beyond the physical limitations of the traditional audio cable. Equipment such as loudspeakers, amplifiers, and mixing consoles can now be positioned for optimal audio performance and what makes the most acoustic sense allowing artistry and sonic performance to take priority over venue logistics. XIRIUM PRO system offers a combination of 7 different input and output audio modules and 2 base stations, including this Dante transmitter module and a Dante receiver module. All the modules contain a rechargeable lithiumIon battery and can be operated either on battery power or on direct mains power.
    I/O Interfaces
See the product