Cart
← Back to Product Catalog

Cobalt C-5000 Fully Featured FM Transmitter

Amplifiers

More Details

Similar Products

C5_2_Front_cutout
  • Ampetronic

Ampetronic – C5-2 Dante

The C5-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
    Amplifiers
  • Dante Ch: 2 In
  • AES67 Enabled
See the product
nexo-dtd-amp-4x07_400px
  • Nexo

NEXO – DTDAMP 4×1.3

Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms).  Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). The DTDAMP partners perfectly with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure – either in a ‘dry hire’ application where the user has limited knowledge, or in a fixed installation such as a bar or club. 
    Amplifiers
  • Dante Ch: 2 In
  • 24-bit
See the product
IX60-4
  • Dynacord

IX60:4

The IX60:4 is a 4-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX60:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality. IX60:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz. The IX60:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices. IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product