Cart
← Back to Product Catalog

Connect Series 34D

Amplifiers

More Details

Similar Products

FLX160-2-70V|FLX160-2-70V
  • Stewart Audio

Stewart Audio – FLX-E-160-2-CV-D

2 Channel DSP-Enabled Amplifier 2 x 160W @ 70/100V The FLX160-2-CV is a 2 channel, 70V/100V Network Enabled 1/2 rack amplifier delivering 160W per channel with built in DSP, RS232 control and Remote volume control.
  • Onboard DSP for signal routing, filtering, and bridging
  • USB and RS232 available for configuration
  • 1/2 rack package
  • Remote Volume Control
  • Signal Sense Technology
  • Made in the USA
    Amplifiers
See the product
i60D_mit_Steckverbinder_frei
  • Aimline

AIMLINE – i60D PoE+ amp

The AIMLINE i60 D PoE+ amplifier impresses with its minimal size and its inner values. It is a PoE+ amplifier with an internal Sharc 300 MHz DSP and a power of 2 x 30 W. The input signal is simply connected directly to the i60 D PoE with a network CAT cable via Dante / AES67. Alternatively, 2 analog audio channels can be connected. The powerful DSP board provides access to gain, delay, 10 Bd EQ with IIR filter and 24 internal presets. Power is supplied via PoE+. This means that installations with very long cable runs can be carried out easily and inexpensively. The control and monitoring takes place via an IP-based network with the support of the PAN C software. All active AIMLINE and KLANGWERT digital systems can thus be controlled using just one software. Made in Germany

    Amplifiers
See the product
Ashly_-_nXe_752
  • Ashly Audio

Ashly – nXe752bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 4 In
See the product