CTP Systems - DIO88

CTP Systems – DIO88

Product Information

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.

The init includes a power indicator and network connection indication on the RJ45 jacks.

Shure – MXCWAPT

The MXCWAPT Access Point Transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. The MXCWAPT automatically selects the clearest channel in the 2.4 GHz and 5 GHz frequency bands and switches channels to avoid potential interference. The access point provides both Dante™ and analog audio inputs and outputs, and uses a single Ethernet connection for power, audio, and control.

I/O Interfaces

24-bit
48kHz

See the product

Sonifex

Sonifex – AVN-AIO8R 8 Input, 8 Output, Dual Dante® Interface, PoE

The AVN-AIO8R audio converter and interface converts up to eight analogue inputs and eight analogue outputs to and from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.

This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

I/O Interfaces

Dante Ch: 8x8
16-bit, 24-bit, 32-bit

See the product

Extron Electronics

Extron – AXI 44 AT

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. It features four mic or line inputs on 3.5 mm captive screw connectors, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 44 AT also features four line level outputs for routing any four Dante channels from the network to the audio system. The AXI 44 AT interfaces with any Dante-equipped audio processor, and can be powered via PoE.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

CTP Systems – DIO88

Product Information

Similar Products

Shure – MXCWAPT

Sonifex – AVN-AIO8R 8 Input, 8 Output, Dual Dante® Interface, PoE

Extron – AXI 44 AT

Stay connected to Dante

Support

Company

Dante Networking Alliance