Dante AV Ultra DAV-01SR

Product Information

Decode Dante AV Ultra to 12G-SDI/HDMI

ADTECHNO Dante AV Ultra Encoders and Decoders are the award-winning AV over IP product, powered by the Dante AV Ultra solution, allowing for lossless 4K Ultra HD video and extremely low-latency IP streaming over 1GbE network. It utilizes ProAV-optimized Colibri codec, preserving high-quality graphical content for 4K60 with perfect video and audio synchronization.

Both the encoder and decoder come equipped with a 2.0-inch IPS screen, offering a preview of incoming video images, up to 8 channels of audio level meters, and Dante setting features.

Up to 4K Ultra HD 60p 4:4:4
HDR 10 & HLG
Simultaneous 2 x 12G-SDI and 2 x HDMI out
Auto-downscaling and HDCP conversion
1GbE PoE+ and Secondary 1GbE IP
USB HID, IR in/out and RS-422 (VISCA)

Specifications

Dante Ch: 8x8
Sample Rate: 48kHz
Dante AV Enabled

NTP Technology – Dual MADI Card

Dual MADI Interface

- 2 x MADI I/Ontp-penta-720-io-cards-madi-2
- 2 x 64 channels
- 8 cards = 1024 channels
- Built-in Sample Rate Converter on input
- Choice of physical interface
- Select type of SFP module
- Optical, MM or SM
- Coax
- Redundant mode
- Auto switch-over in case of signal loss

AV Encoders & Decoders

See the product

Jünger

Jünger – Coding Audio Processor D*AP8 CODEC EDITION

The D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional SDI, MADI, Dante™ and analog. Developed in close cooperation with Dolby® Labs, the D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional 3G SDI, MADI, Dante™ and analog. Designed for use in all areas of audio broadcast and distribution, Jünger Audio’s D*AP8 CODEC EDITION offers the functionality to decode and/or encode any current Dolby® audio bitstream and to effectively manage and emulate all Metadata parameters. The D*AP8 CODEC EDITION has built in Dolby® decoding with metadata management and emulation as standard. Encoding is also available as an option. Network based loudness metering and voice over are standard whilst logging, automatic Upmix and fail over are optional. The following Dolby® formats are supported: Dolby® E, Dolby® Digital Plus, Dolby® Digital, Pro Logic II, AAC, HE-AAC.

AV Encoders & Decoders

Dante Ch: 64x64
24-bit

See the product

YUAN

SC6F0N1 HDMI2.0+ Encoder/Decoder

1CH HDMI2.0 4KP60 Encoder/Decoder The SC6F0N1 HDMI 2.0+ supports 1 channel of Dante AV-H video encoder or decode with 4Kp60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

AV Encoders & Decoders

Dante AV Enabled

See the product

Dante AV Ultra DAV-01SR

Product Information

Specifications

Similar Products

NTP Technology – Dual MADI Card

Jünger – Coding Audio Processor D*AP8 CODEC EDITION

SC6F0N1 HDMI2.0+ Encoder/Decoder

Stay connected to Dante

Support

Company

Dante Networking Alliance