DELEC - unito DIO

DELEC – unito DIO

Product Information

The DIO is the Swiss army knife for audio, with an impressive range of tools and converters.

The DIO is the Swiss army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources.

1000 point FIR filters on outputs. (Perfect for PA integration with existing 100/70V systems.)
Customized DSP options
Native Delec communication panel integration

BARE – BR-108S

The BR-108S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

I/O Interfaces

See the product

Sonifex

AVN-DIO20

The AVN-DIO20 is a MADI and AES3 to Dante bridging device allowing MADI to connect bidirectionally with AoIP, together with 8 stereo channels of AES3. This simple plug and play audio interface provides a quick and convenient method of connecting legacy MADI equipment to the Dante AoIP audio network.

I/O Interfaces

Dante Ch: 64x64
16-bit, 24-bit, 32-bit

See the product

RDL – FP-NML2P

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

I/O Interfaces

See the product

DELEC – unito DIO

Product Information

Similar Products

BARE – BR-108S

AVN-DIO20

RDL – FP-NML2P

Stay connected to Dante

Support

Company

Dante Networking Alliance