Cart
← Back to Product Catalog

DiGiCo – SD12

Mixers

More details

Similar Products

digico-sd11_1200px|digico-sd11_1200px
  • DiGiCo

DiGiCo – SD11

The SD11 is the smallest by far of all the DiGiCo consoles, though don't let that deceive you: this 19-inch rack mount or table top mixer is a very powerful solution that can be incorporated into pretty much any mixing environment. The SD11 is the smallest by far of all the DiGiCo consoles, though don't let that deceive you: this 19-inch rack mount or table top mixer is a very powerful solution that can be incorporated into pretty much any mixing environment; like its bigger brothers, the SD11 is also powered by Stealth Digital Processing and floating point Super FPGA technology, and transporting it couldn't be easier – just pop it on the back seat of the car. This easy-to-use mixer delivers extremely high performance at a staggeringly competitive price point.    The SD11 is manufactured with a steel chassis and a polycarbonate-overlaid aluminium worksurface which makes it super-lightweight. Its user interface comes courtesy of DiGiCo's trademark 15-inch, high resolution TFT LCD touch screen with backlit display; and its 12 touch sensitive moving faders guarantee a simple and intuitive workflow. 
    Mixers
  • Dante Ch: 8x8
  • 48kHz-96kHz
See the product
Shure_-_SCM820_DAN
  • Shure

Shure – SCM820 DAN

8-Channel Digital IntelliMix Automatic Mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording. 8-Channel Digital IntelliMix Automatic Mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
  • Provides networking capabilities, comprehensive software control, AMX and Crestron compatibility, and analog / digital connectivity between devices
  • Offers IntelliMix® technology and digital feedback reduction
  • Features 8 active-balanced microphone or line-level inputs and 8 dedicated, impedance-balanced direct outputs
  • Includes SCM820, hardware kit, ethernet cable, power cable, USB flash drive, and user guide
    Mixers
See the product
  • RDL

RU-NMP44

The RU-NMP44 is a network mixing processor containing six virtual audio mixers controlled by network commands from RDL and other network remote controls. Each mixer operates independently with input signal attenuation from unity to off. The output level from each mixer is independently adjustable from unity to off. Based on the commands sent to the RU-NMP44, each mixer can be used as a mixer, a source selector, a priority paging inserter and/or as a volume control. The outputs from four of the mixers drive corresponding network audio channels. The outputs from two of the mixers drive line-level +4 dBu audio outputs. The RU-NMP44 is configured using RDL CONSOLE or other network control software. If ducking is used, one of the four network audio inputs is assigned as the priority input. That input is connected to all six virtual mixers. An audio detector with installer-defined threshold and recovery delay may be assigned to one, several, or all of the six mixers. For each of those mixers, the priority input is set to a defined level, and the remaining three inputs are each set to attenuate to a fixed level between -10 and -64 dB when a message is detected on the priority input. If hum is anticipated from the paging source, one of four high-pass filter may be enabled. Up to four preset configurations may be stored in the RU-NMP44. Each preset can define any or all mixer level settings. A preset is activated by a network command, an RDL network or wired remote control, a momentary switch closure or a compatible open-collector from other equipment. The RU-NMP44 may be configured to power up to a preset, to the last settings used, or with all levels “off”. The RU-NMP44 may be powered from an external 24 Vdc power supply, available separately. The RU-NMP44 is equipped to operate from a PoE enabled network switch. The RU-NMP44 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NMP44, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-NMP44 is ideal for adding volume control, mixing, switching and ducking to existing network audio systems. The digital signal processing offered in the RU-NMP44 often fulfills all the requirements for an audio system design, such as in classrooms, meeting rooms, restaurants/bars, fitness gyms and retail stores. The RU-NMP44’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. The RU-NMP44 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.
    Mixers
  • Dante Ch: 4x4
  • 24-bit
See the product