Technical parameters：
Speaker model: CA-408DA
Speaker type: Active Speaker
Unit composition: 8×4″ Full frequency unit
Frequency response: 95Hz-17kHz （-10dB）
Sensitivity: 96dB
Rated impedance: 6Ω
Sound pressure level: 126dB（peak）
Rated power: 240W
Horizontal coverage Angle: 100°x30°-40°，Electronic control
Technical parameters：
Speaker model: CA-401D
Unit configuration: 1×4"(100mm) Full frequency unit
Frequency range: 120Hz-20kHz
Rated power: 30W
Sound pressure level: 110dB
Sensitivity: 90dB
Coverage Angle: 100°×90°
DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment
Connection mode: RJ45 interface
Size (mm) : 145×253×180 (W×H×D)
The CA124 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the CA124, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CA124 is a selfpowered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one CA124 has 48 amplifier and 48 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.
