Cart
← Back to Product Catalog

ED2-3000

Amplifiers

More Details

Similar Products

glensound-athens2
  • Glensound

Glensound – Athens 2

Athens 2 is twin stereo phono preamplifier with excellent RIAA equalisation suitable for both moving magnet and moving coil turntable cartridges. It has redundant network circuits with 2 x copper & 2 x SFP interfaces. Athens 2 is twin RIAA phono preamplifier with Dante® and AES67 network audio outputs. It is a mains powered device with two high quality stereo turntable preamplifiers inputs. Each preamplifier has its own set of preset controls to allow accurate matching of the Athens 2 input circuitry to the turntable's cartridge. Input gain, input impedance and input capacitance can all be set for each of the two stereo inputs.The Athens 2 is suitable for use with both moving coil and moving magnet cartridges. To provide the best possible equalisation of the RIAA curve the preamps feature high quality high tolerance analogue circuitry followed by a high quality analogue to digital converter and DSP. The combination of the analogue circuitry and DSP provides a very good quality RIAA equalisation resulting in a very flat output.
    Amplifiers
  • Dante Ch: 2x2
  • 24-bit
See the product
Q3200i
  • DMIX

DMIX – Q3200i

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q3200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×800W

4 Ω power: 4×1200W

2 Ω power: 4×1500W

Bridge: 4×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

    Amplifiers
See the product
marani-MDA4-2000PS
  • Marani

Marani – MDA4-2000PS

MDA4-2000PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x1700W @ 4 ohms and 4x2320W @ 2 ohms, or able to drive 70V Constant Voltage Lines. MDA4-2000PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x1700W @ 4 ohms and 4x2320W @ 2 ohms, or able to drive 70V Constant Voltage Lines. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. MDA4-2000PS includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 4 output stages use the well-proven Class D module-full bandwith PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. MDA4-2000PS is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product