Cart
← Back to Product Catalog

Electro-Voice – NetMax Dante Audio Module DM-1

Dante Interface Cards

More details

Similar Products

mx2m-aux-dante-32ch
  • Lightware

Lightware – MX2M-AUX-DANTE-32CH

MX2M-AUX-DANTE-32CH is a Dante and AES67 compatible input and output board for the MX2M modular matrix family. The hot-swappable IO board is seen as two distinct Dante devices from the Dante network.

Each Dante card can simultaneously send and receive 16 mono audio channels from the Dante network it is connected to via its 1GbE connectors. This makes the board capable of sending and receiving 2 x 16 mono audio channels from the same or different Dante domains with the same or different sampling frequencies.

The received audio is made available to all video and audio outputs over the audio layer of the matrix as LPCM audio streams. Similarly, the audio sent to the Dante network can originate from any of the video or audio inputs of the matrix carrying LPCM audio.

The board supports redundant operation mode where the same stream is received or transmitted over a Primary and a Secondary Ethernet connector.

    Dante Interface Cards
See the product
Bose_-_PowerMatch_Dante|Bose_-_PowerMatch_Dante
  • Bose Professional

Bose – PowerMatch Dante

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
    Dante Interface Cards
  • Dante Ch: 8x8
  • 24-bit
See the product
RTS_OMNEO_OKI_card|RTS_OMNEO_OKI_card
  • RTS

RTS – OKI Keypanel Interface Card

The OKI keypanel interface cards fit into select RTS user stations and provide native OMNEO IP connectivity for RJ45 Ethernet connections into the OMNEO network with optional single or multimode fiber modules.
    Dante Interface Cards
  • Dante Ch: 2x2
  • 24-bit
See the product