Focusrite - ISA ADN2

Focusrite – ISA ADN2

Product Information

ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT andS/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.

The card offers primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIFoutput. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock,or for syncing external equipment to the Dante network.

Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.

Specifications

Dante Output Channels: 2
Bit Depth: 24-bit
Sample Rate: 192kHz

Clear-Com – E-Dante64-HX

E-DANTE64-HX is a Dante interface card for the Eclipse HX matrix systems (Omega, Median and Delta). It supports DANTE and is AES67 compatible, allowing users to transport up to 64 channels of high quality audio to multiple Dante-enabled devices using standard Ethernet network infrastructure E-DANTE64-HX is a Dante interface card for the Eclipse HX matrix systems (Omega, Median and Delta). It supports DANTE and is AES67 compatible, allowing users to transport up to 64 channels of high quality audio to multiple Dante-enabled devices using standard Ethernet network infrastructure. E-Dante64-HX provides Eclipse HX with 16, 32 or 64 channels of low latency, high quality AoIP interconnection. It supports all standard sample frequencies for professional use, including a 96kHz/32-channel option. Other E-Dante64-HX Features:

Channel quantity, health and sample rate indicators
Primary and secondary RJ-45 or fiber connections
Port label data exchange to intercom panel keys
Up to 64 ports per card; VOX on all 64 channels
Channel labels carried over from 3rd party devices
Optional SFP fiber interface fitted on both primary and secondary network interfaces
Maximum of 7 cards per frame

The Eclipse HX Configuration Software (EHX) can enable intercom panels to display each Dante Controller channel label or the label of the current audio source routed to the channel.

Dante Interface Cards

Dante Ch: 64x64
24-bit

See the product

Q-SYS

Q-SYS – CDN64

The CDN64 Dante™ Audio Bridge Card provides third-party Dante enabled digital audio products the ability to integrate into the Q-SYS Ecosystem. It provides a bridge for up to 64 x 64 channels of Dante audio into the Q-SYS Ecosystem for advanced processing redistribution over larger LAN and WAN IT infrastructures.

Dante Interface Cards

See the product

RDL RN2ML

The D-RN2ML is a complete wall-mounted Dante or AES67 audio network interface. It features one XLR mic or line input on the front panel, one stereo Mini-jack line-level input summed to mono on the front panel and two balanced line outputs on a rear-panel detachable wiring block. The module is configured and adjusted using RDL CONSOLE or other network control software. The D-RN2ML fits a standard US single-gang electrical box or can be used with the RDL EP-1 adaptor for mounting in EU/UK square back boxes with 60 mm distance screw hole mounting centers. The D-RN2ML is PoE powered and is available in multiple finishes with optional customized graphics.

Dante Interface Cards

Dante Ch: 2x2
24-bit

See the product

Focusrite – ISA ADN2

Product Information

Specifications

Similar Products

Clear-Com – E-Dante64-HX

Q-SYS – CDN64

RDL RN2ML

Stay connected to Dante

Support

Company

Dante Networking Alliance