Cart
← Back to Product Catalog

Glensound – Beatrice LH4

Intercoms

More details

Similar Products

RTS_DBP_Hero_TopDownLeft_46598
  • RTS

RTS – DBP

DBP is a four-channel/four-button wired beltpack that runs on PoE+ (Power over Ethernet 802.3af and 802.3at) and connects using OMNEO IP technology. Its unique hybrid design supports both digital partyline and matrix keypanel modes: for use as a digital partyline device, DBP connects to an OMS; for use as a portable keypanel, including functionality like point-to-point communication, DBP can be connected to any RTS digital/IP matrix product using OMNEO – including OMI cards in ADAM/ADAM-M frames or OMNEO ports on ODIN frames. DBP automatically selects the correct mode of operation (digital partyline/OMS or keypanel/matrix) when connected and switched on.

DBP’s PoE-driven design gives it an unmatched level of scalability and makes it easy to add new users. In and Out PoE ports (two etherCON locking RJ45 connectors) allow up to six DBP devices to be daisy-chained together from the same PoE switch port when used in partyline mode. Up to 40 DBPs can be connected to an OMS, allowing for the creation of an extensive digital partyline system – all in addition to the other wired and wireless devices OMS supports. Depending on the matrix model/configuration, up to 64 DBPs can be connected to an OMI card for ADAM matrices, and up to 128 DBPs can be connected to one ODIN.

    Intercoms
  • Dante Ch: 4x4
  • AES67 Enabled
See the product
delec-dante-desk16-crop|delec-dante-desk16-crop
  • DELEC

DELEC – Desk 16 Dante

The DELEC Desk 16 Dante is a 16-key desktop subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624. These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.
    Intercoms
See the product
clear-com-eclipse-hx-omega_1200px|clear-com-eclipse-hx-omega_1200px
  • Clear-Com

Clear-Com – Eclipse HX-Omega

Eclipse HX-Omega is the most advanced and highest density digital matrix system on the market, offering up to 460 ports (using combinations of 64-channel MADI cards, 32 port IP/Integra cards and 16 port MVX-A16 RJ-45 cards) over 15 interface card slots in a 6RU chassis.   Eclipse HX-Omega is the most advanced and highest density digital matrix system on the market, offering up to 512 ports (with any combination of 64 frames). Each 6RU Eclipse HX-Omega system features 15 interface card slots for housing one of many types of interface cards available for different applications. The MVX-A16 Interface card, for example, provides full-duplex connections with panels, external lines, and interfaces to other matrix systems. External interface modules are connected using external 1RU and 3RU IMF frames, leaving all 15 slots available for port and interface cards. Up to 64 Eclipse HX matrices can be connected to form a single networked installation. Eclipse HX-Omega Features:
  • 6RU system frame with passive back-plane and 15 interface card slots
  • Up to 512 internal ports (with any combination of 64 frames)
  • Dual-redundant processors, CPU-HX fitted; dual-redundant PS-208 power supplies fitted
  • Expandable to become a multi-frame system with redundant non-blocking fiber
  • Networking/Linking options include 4-wire, Fiber, IP, MADI, E1/T1, GPIO, DANTE and AES67
  • Seamless integration with FreeSpeak II Wireless Intercom and IP Communication Panels 
    Intercoms
  • Dante Ch: 64x64
  • 24-bit
See the product