Cart
← Back to Product Catalog

Glensound – Beatrice M1

Intercoms

More details

Similar Products

RTS_-_DKP_16_CLD
  • RTS

RTS – DKP 16 CLD

The DKP 16 CLD is a Color Desktop Display Keypanel. The DKP 16 CLD is a Color Desktop Display Keypanel. Full-Color LCD Displays: The new color displays host a rich and intuitive graphic user interface that allows to indicate different keypanel functions in different colors. Modern, Modular Design: The unit is ergonomically designed to fit easily into any control room or truck application. The back panel is optimized for future expansion. Multi-Directional Keys: 16, multi-directional keys used for talk, listen, and emulation of traditional level control function. Enhanced Features
  • DKP 16 CLD allows up to six auxiliary inputs, three relays, independent digital gain control for microphone sources, configurable audio routing and much more through an option board
  • DSP Processing
  • Acoustic Echo Cancellation, Equalization, Mixing, Filtering, and Metering
  • USB
  • For future expansion and other planned interface features.
  • User-Programmable Buttons
  • Two user-programmable buttons (UPG-1, -2) provide custom shortcuts to menu functions
    Intercoms
See the product
Beatrice_P1_Angle_BAN
  • Glensound

Glensound – Beatrice P1

The Beatrice P1 is a phone handset for Dante® network intercom. The Beatrice P1 is a one channel handset. The user of the handset on the P1 can listen to one audio feed from the network and send one audio channel out onto the network. Depending upon how the Dante® network has been routed the incoming audio circuit and outgoing audio circuit can be different locations and the outgoing circuit can be routed to multiple loctions. Audio to / from the handset is automatically turned on when the handset is off the hook and turned off when on hook.  
    Intercoms
  • 24-bit
  • 48kHz
See the product
ctp-systems-FWD6006s|ctp-systems-FWD6006s
  • CTP Systems

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required. The FWD6006 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 100mm high, 180mm deep, 200mm wide.
    Intercoms
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product