Glensound – DARK16I


More details

Similar Products

RedNet2_front-600-update|RedNet2_front-600-update
  • Focusrite

Focusrite – RedNet 2

RedNet 2 adds 16 remote-controlled analogue channels in and out to your RedNet network and can be located anywhere you can run an Ethernet cable. Featuring Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, it delivers 119dB dynamic range at sample rates up to 192kHz. The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.
    I/O Interfaces
  • Dante Ch: 16x16
  • 24-bit
ABX-6-Vorderseite
  • Fohhn

Fohhn – ABX-6

The ABX-6 Dante breakout box can be equipped with up to two 1000Base-X fiber transceivers (SFP module). That allows for redundant applications via fiber optical cable. Additionally, it has two 1000Base-T ethernet connections. Thus, ABX-6 supports a convenient connection to Focus Venue, Focus Modular or DI Amplifiers over long distances.

Main features

  • SFP ports for 1000Base-X fiber transceiver (Dante Primary und Secondary)
  • 1000Base-T Ethernet connections (Dante Primary und Secondary)
  • Up to eight audio channels: 2 × AES/EBU, 2 × Airea connect
  • Fohhn Net control signals are transmitted over ethernet
  • Integrated Dante Brooklyn II module
    I/O Interfaces
  • Dante Ch: 8 In
  • 24-bit
attero-tech-unDX2IO|attero-tech-unDX2IO
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unDX2IO+

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection. The unDX2IO+ replaces the legacy unDX2IO.
    I/O Interfaces
  • Dante Ch: 4x4
  • 44.1kHz-48kHz