Hear Technologies – hear back PRO mixer


More details

Similar Products

SwitchBack-PLUS
  • Hear Technologies

Switch Back PLUS

Dante audio interface, mixer, and MIDI control in one compact device, the Switch Back PLUS condenses functions into a single, unique tool. Connect via Cat6 cable to a PoE+ network switch, plug in your headphones/speakers, route channels, and start making music. Mixer: Control volume, panning, and stereo width of 64 Dante audio channels, with channel names on crisp OLED displays. Local inputs mix in at zero-latency. The mix is fed through a master volume control and output to a balanced stereo pair and two headphone jacks. Interface: Local inputs include XLR microphone input with switchable phantom power, high-impedance instrument input with adjustable gain, and two balanced line-level inputs. Route these and the main stereo mix to other devices on the Dante network. Unmuting four default-muted Dante channels provides intercom. MIDI control: MIDI shares the same network connection as Dante to send/receive CCs. Knobs can control software and external hardware.
    Personal Mixing & Monitoring
  • Dante Ch: 64 In
  • 48kHz-192kHz
D800-Dante-rear_400px|D800-Dante-rear_400px
  • Aviom

Aviom – D800-Dante

The D800-Dante A-Net Distributor provides seamless connectivity between a Dante audio network and Aviom Personal Mixers, including the A-16II and new A360.
    Personal Mixing & Monitoring
  • Dante Ch: 64x16
  • 24-bit
glensound-virgil-ob|glensound-virgil-ob
  • Glensound

Glensound – VIRGIL OB

The Virgil OB is a robust portable PoE powered headphone amplifier with the addition of a pair of balanced analogue outputs all built into a hardwearing lightweight aluminium case. Long Product Description (150 words or less): Virgil OB receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume of the headphones. The 2 incoming audio circuits are also presented on a pair of balanced analogue audio XLRs on the rear of the unit. A switch on the side of the unit sets these 2 outputs to be post or pre fade of the front panel level control. The Virgil OB is housed in a robust but lightweight aluminium casing that has been proven to withstand the rigours of life on the road. It also features a hardwearing beltclip allowing the unit to be quickly and securely attached to both people and infrastructure. As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil OB suitable for driving television presenters ear pieces.
    Personal Mixing & Monitoring
  • Dante Ch: 2 In
  • 24-bit