Cart
← Back to Product Catalog

Innosonix – MA24/D²

Amplifiers

More details

Similar Products

powersoft-duecanali-4804-dsp-d|powersoft-duecanali-4804-dsp-d
  • Powersoft

Powersoft – Duecanali 4804 DSP+D

This amplifier platform is ideal for medium to large sized installations that require high power outputs to drive subs and multiple speakers. Duecanali 4808 DSP+D offers Powersoft’s renowned reliability and power density in a light, compact unit. This amplifier platform is ideal for medium to large sized installations that require high power outputs to drive subs and multiple speakers. Duecanali 4808 DSP+D offers Powersoft’s renowned reliability and power density in a light, compact unit. Built in state of the art DSP, in conjunction with Dante, allows flexibility during installation and extensive controllability.
    Amplifiers
  • Dante Ch: 2 In
  • 24-bit
See the product
ashly-nXp-8002_600px
  • Ashly Audio

Ashly – nXp8002d

The nXp8002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit
See the product
extron1002
  • Extron Electronics

Extron – NetPA U 1002

The Extron NetPA U 1002 is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers two 100 watt channels at 8 or 4 ohms, in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1002 includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1002 is a highly efficient advanced Class D amplifier that features defeatable auto standby with fast wake up and our patented CDRS – Class D Ripple Suppression.

    Amplifiers
  • Dante Ch: 2x4
  • 24-bit
See the product