Cart
← Back to Product Catalog

IX15:4

Amplifiers, DSPs (Digital Signal Processors)

More Details

Similar Products

PLM10000-400px|PLM10000-400px
  • Lab.gruppen AB

Lab.gruppen – Lake PLM10000Q

The two-input, four-output PLM 10000Q seamlessly integrates networked digital signal distribution, drive processing, power amplification, and load verification plus performance monitoring in a single hardware unit and unified software controller.
    Amplifiers
  • Dante Ch: 8x8
See the product
Inter-M_-_DSA-500Q
  • Inter-M

Inter-M – DSA-500Q

The DSA-500Q is a high-power 4-channel professional amplifier that can deliver high performance in environments such as school auditoriums, music rooms, government offices, cultural centers, and religious facilities that require high-quality sound. The DSA-500Q is a high-power 4-channel professional amplifier that can deliver high performance in environments such as school auditoriums, music rooms, government offices, cultural centers, and religious facilities that require high-quality sound. Feature High quality CLASS-D 4CH Professional Amplifier DSA-500Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall. 4CH Dante™ Digital Audio Input You can input 4CH Dante™ digital audio through the network port and 4CH analog audio inputs. Built-in DSP Parametric 8 band EQ, crossover filtear using HPF and LPF,delay, attack / release adjustable limiter. Easy control of equipment through front panel with OLED and PC GUI Using OLED and operation switches installed on the front, and DSA-500Q dedicated software, various parameters can be adjusted. Easy one-touch front dust filter cleaning It is possible to remove the front dust filter easily by separating the ventilator on the front of the equipment by one-touch method. Simultaneous control of multiple amplifiers via PC GUI The PC GUI allows intuitive manipulation of various functions of the DSP, and simultaneous control of multiple amplifiers through IP registration of the equipments. Up to 340 ms delay time adjustable When configuring a system with multiple speakers, you can adjust the Delay function to control the audio transmission time up to 340 msec for clear sound. Frequency band adjustment using HPF and LPF You can use the Butterworth / Bassel / Linkwithz-Riley filter to adjust the frequency band required for your speakers.
    Amplifiers
  • Dante Ch: 4 In
See the product
ashly-nXe-1.54_600px|ashly-nXe-1.54_600px
  • Ashly Audio

Ashly – nXe1.54bd

The nXe1.54bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4 In
See the product