Cart
← Back to Product Catalog

JBL Synthesis – SDA-2200

Amplifiers

More details

Similar Products

taiden-hpa-160d-02
  • Taiden

Taiden – HPA-160D/02

The HPA-160D/02 is a Digital audio power amplifier. Its a compact and efficient combination of digital power amplifier and switching power supply.

  • Class-D power amplifier with theoretical efficiency over 80%
  • Automatic adaptation to all mains voltages world-wide
  • Low-heat generation, long service life
  • Energy saving and cost efficient
  • Operation mode: Stereo/bridge
  • 2×SPEAKON socket for loudspeakers
  • TM 2×RJ45 jack for digital audio input via Dante networking
  • 1 Line In and 1 Line Out (Diameter 6.4 mm phone jack)
  • Embedded Web Server for power amplifier configuration (e.g. limiter, EQ and mix) and view of microphone on/off status
  • All-round protection from shortcut circuit, direct current and overheating, power supply overload or overheating control
    Amplifiers
See the product
D-6000_FRONT
  • Inter-M

Inter-M – D-6000

The D-6000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network. 

Dante delivers low latency, robust synchronization, I/O scalability, and installation simplicity via standard IT technology. 

The D-6000 will deliver up to 4800 watts of power per channel down to 4 ohm loads. Housed in two RU compact frameworks, the D-6000 Class D amplifier offers high power with reduced size and weight. 

The combination Class D topology amplification circuitry combined with SMPS (Switch Mode Power Supplies) creates a high efficiency amplifier that offers reduced power consumption and low heat dissipation. The D-6000 is ideal for applications where high power and efficiency is required. This may include houses of worship, arenas, stadiums, concert venues, touring or any other large-scale facilities.

    Amplifiers
  • Dante Ch: 8 In
See the product
ED009
  • Keiga

Keiga – ED009

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* 2nd Rj45 connection for daisy chain 90W power to other PoE devices

* Supports both IEEE 802.3af/at/bt (PoE/PoE+/PoE++) and local DC-In

* Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Built in 6.3mm microphone input as Dante audio in

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak.

    Amplifiers
See the product