Jünger – Surround Audio Processor D*AP8 TAP EDITION


More details

Similar Products

williams-sound-fm-plus
  • Williams AV

Williams Sound – FM+

The FM+ End users can listen with either an FM receiver or over Wi-Fi with their own smartphone. Along with this flexibility comes exceptional audio quality, as the FM+ is built on a professional digital audio (DSP) platform. Added plus: Its optional Dante interface provides integrators with a full audio networking solution.

The new FM+ is designed to support those who want to use their own smartphones and headphones for a more discreet assistive listening experience. Simplicity is also available for those who want a more traditional assistive listening system with a dedicated FM receiver and headset.

The FM+ Dante interface provides integrators with a full digital audio networking solution. It is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110.

    Audio Embedders & De-Embedders
  • IDK

NJR-AB08DAN

The NJR-AB08DAN is an audio bridge interface that converts audio signal protocols between IP-NINJAR and Dante networks. The NJR-AB08DAN converts audio packet on the IP-NINJAR network into the suitable Dante packets and vice versa for routing signals efficiently to the correct destination. It supports up to 8×8 audio I/O channels.
  • Transcode Audio signal between IP- NINJAR (SDVoE) and Dante protocol
  • Receives up to four (4) audio streams from IP-NINJAR transmitters and output as Dante protocol up to eight (8) channels
  • Receives up to 8 channel Dante audio from Dante devices and output as IP-NINJAR (SDVoE) protocol up to four (4) audio streams
  • Dante audio embedded on HDMI signal at IP-NINJAR receiver
  • Dante audio de-embedded to analog audio signal at IP-NINJAR receiver
    Audio Embedders & De-Embedders
aurora-htx-tc1_1200px|aurora-htx-tc1_1200px
  • Aurora Multimedia

Aurora Multimedia – HTX-TC1

The HTX-TC1 topology reduces the 10G Ethernet switch port count per node by 50%, thanks to Simultaneous/Full Duplex operation on a single 10G Link! The HTX-TC1 topology reduces the 10G Ethernet switch port count per node by 50%, thanks to Simultaneous/Full Duplex operation on a single 10G Link! No longer do you need separate transmit and receive network connections. The HT Series is the most complete in-room solution ever created increasing capabilities while reducing costs and complexity. The HTX-TC1 has the lowest 10G Ethernet switch port cost due to its ability to transmit and receive full bandwidth in both directions on a single port. Typical AV over IP systems utilize two ports, one for encoding and one for decoding. The HTX-TC1 would only require a 24-port switch compared to the usual 48 of current solutions.
  • Simultaneous Encode/Decode on Single 10G Link
  • HDBaseT-IP Core Technology
  • Zero Frame Latency Scaling
  • 4K60 4:4:4 & HDR 18Gbps
  • HDMI® 2.0/HDCP 2.2 In/Out
  • HDBaseT™ 2.0 Transmit & Receive HDBaseT™ 100m (330ft) with Unshielded Cable
  • Seamless & Full Break-away Switching
  • 10G SFP+ (Fiber) & 10G PoE+ RJ-45 (Copper)
  • Audio DSP & Dante™/AES67 Options 2 or 8 Channel
  • USB 2.0 Host/Device with Selectable Direction
    Audio Embedders & De-Embedders