Cart
← Back to Product Catalog

Lab.gruppen – PLM5K44

Amplifiers

More details

Similar Products

linea-research-44Cxx-dante
  • Linea Research

Linea Research – 44C06-Dante

The Linea Research 44C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. The Linea Research 44C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. Linea research 44C Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
    Amplifiers
  • Dante Ch: 4x4
  • AES67 Enabled
See the product
CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4060

The CMX DSP-4060 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
See the product
crown-audio-DCi-DA-41250_1200px|crown-audio-DCi-DA-41250_1200px
  • Crown Audio

Crown Audio – Dci 4|1250DA

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit
See the product