Lance Design – ADX-2400D


More details

Similar Products

m232_ta_1200-1024x739|m232_ta_1200-1024x711
  • Studio Technologies

Studio Technologies – Model 232 Announcer’s Console

The Model 232 Announcer's Console is designed for on-air and live-event use by announcers and commentators who will benefit from high-performance microphone and headphone audio resources. Supports Dante audio-over-Etherent media networking technology and includes an extensive set of features. The compact tabletop unit uses the STcontroller software application for configuration. Three pushbutton switches allow the user to control three audio output channels: one main and two talkback. Two gigabit (GbE) Ethernet interfaces allow redundant Dante operation. Powered using a Power-over-Ethernet (PoE) connection or an external source of 12 Vdc.

    Commentary Systems
  • 32-bit
  • 48kHz-96kHz
B-DF4fb
  • CTP Systems

CTP Systems – B-DF4

The B-DF4 is a network four channel four wire unit in a compact aluminium beltpack enclosure.
With four audio inputs and four audio outputs it will meet the most demanding beltpack requirements. The B-DF4 has a built in speaker so may be used as a handy four wire box.
B-DF4 front
The talk buttons can be programmed to operate push to talk, latching or 'smart' (tap to latch, push to talk). When selected to talk the buttons illuminate red.
Listen input(s) may be enabled/disabled in conjunction with the listen select switch. Buttons may be set to flash on incoming audio.
Programming the B-DF4 is simple using the OLED display which also shows line input and output levels during normal operation.Power may be supplied Power over ethernet (PoE) or a 9-16 volt external DC supply.

    Commentary Systems
  • Dante Ch: 4x4
Lance_Design_-_ADX-8000
  • Lance Design

Lance Design – ADX-8000

The ADX-8000 is a layer-2 Ethernet Switch and redundant power supplies for use with ADX-120 announce units and ADX-140 XLR Interface units. It provides highly-reliable Ethernet connections over single-mode ST fiber ports, and fully-redundant power for the ADX-120s. The ADX-8000 is a layer-2 Ethernet Switch and redundant power supplies for use with ADX-120 announce units and ADX-140 XLR Interface units. It provides highly-reliable Ethernet connections over single-mode ST fiber ports, as well as redundant power for the ADX-120s. One ADX-8000 and three ADX-120s provide a full-featured announce booth system with no other equipment required.
    Commentary Systems