Linea Research – 44M20-DANTE


More details

Similar Products

redx-sapphire-III
  • Redx

Redx – Sapphire III

The Sapphire III is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. The Sapphire III is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. It uses the latest SSA Technology and digital audio transmission and processing technologies to create:
  • PSM phase modulation technology, zero crossover distortion
  • Single-stage power conversion is equivalent to the direct use of AC mains power, which is one level lower than traditional class D power amplifiers.
  • Two-way energy recovery system to improve power conversion efficiency and effectively reduce the speaker coil voice temperature
  • ZVS, ZCS Soft Switch Technology, Significantly Reduces Switch Heat, Further Improves Conversion Efficiency
  • Overall efficiency up to 90% ultra high
In the past 100 years, the audio power amplifier topology has undergone Class-A, Class-AB, Class-D, etc., but it has always been a compromise between efficiency and sound quality. Until today, SSA Technology has achieved Sapphire III's Class-A sound quality with 90% overall system efficiency with its advanced and precise audio modulation technology, single-stage power conversion, bi-directional energy recovery and soft-switching technology. Truly "efficient sound!" The application of the latest digital audio processing and transmission technology has enabled Sapphire III to achieve a new level of efficiency and sound quality. It is highly efficient, lightweight, reliable, and flexible, combined with its Class-A sound quality, making it widely used in system integration projects such as small entertainment shows and multi-purpose halls.
    Amplifiers
dynacord-ipx-20-4
  • Dynacord

Dynacord – IPX20:4

Dynacord's IPX20:4 is a 4 x 5000 W multi-channel installation DSP amplifier. Dynacord's IPX20:4 is a 4 x 5000 W multi-channel installation DSP amplifier.
  • 4 x 5000 W multi-channel installation DSP amplifier with digitally controlled PFC supply
  • Fully integrated DSP with high-resolution 96 kHz processing and FIR Drive
  • Dante and OCA integration via OMNEO with fallback options
  • Parallel drive mode with 70/100V and low impedance operation
  • High efficiency Eco Rail technology for lower operating costs
    Amplifiers
  • Dante Ch: 8x2
  • 48kHz-96kHz
Powersoft-T602_front_big
  • Powersoft

Powersoft – T602

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit