Cart
← Back to Product Catalog

Linea Research – 48M10-Dante

Amplifiers

More details

Similar Products

Crest_Audio_CKd_608_Front_03611440
  • Crest Audio

Crest Audio – CKd 608

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
    Amplifiers
  • Dante Ch: 8x8
See the product
leonis-SMA-OBIA2
  • Leonis Cinema

Leonis Cinema – SMA-OBIA

LIDSA32 (Immersive Digital Surround Amplifier-32 Channels) belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. SMA-OBIA belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. Each digital-analog conversion will produce a loss of sound, SMA-OBIA link reduces DAC conversion link. So our structure is more rational, more integrated. The sound of the output will be direct, dynamic amplitude larger, transient better. It effectively overcomes defects of the traditional analog amplifier (such as big volume, big distortion, low power efficiency, etc.). Its power utilization rate can be up to 95%. Features:
  • High integration,32 channels output
  • High power output, attain to cinema level
  • Digital input interface
  • 32 channels analog output
  • Over-current protection, overvoltage protection, over temperature protection
  • Adjust acoustic gain, status display, BTL-PBTL mode switch of per channel by network protocol
    Amplifiers
See the product
CS3004
  • LEA Professional

CS3004D

Introducing the CONNECTSERIES 3004, a 4-channel amplifier with 3000 watts per channel. This addition to the CONNECTSERIES  family is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for large-scale installations. The 3004/3004D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…the Network and Dante CONNECTSERIES are the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud
    Amplifiers
See the product