Cart
← Back to Product Catalog

Lynx Studio Technology – Aurora (n) 24-DNT

I/O Interfaces

More details

Similar Products

dad-dx32r-front
  • DAD

DAD – DX32R

DX32R is your versatile digital audio Swiss knife - an interface and matrix designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distribution installations. It allows you to route all digital input and output and manage them on a mono channel basis within a single unit or a combination of units.

With near zero latency, the DX32R can be used to expand I/O channel count and interface digital components, providing a high quality bridge between AES/EBU, MADI and the Dante IP audio network.

DX32R include a 384x384 multiplexer, enabling all digital inputs and outputs to be routed in any combination; this enables the unit to also split signals for advanced signal distribution.

The DX32R IP Audio protocol is based on the robust tried-and-tested Dante™ digital audio network technology, and will interoperate with products of other brands that comply with Dante.

The protocol is compliant with the AES67 standard for AoIP. The Dante and NTP IP Audio formats provide fast, flexible, and economical audio routing via IP and are compatible with the AX32 AD/DA converter, and other Dante devices. The IP Audio routing provides low latency, tightly synchronized, transport of uncompressed audio over Gigabit IP Ethernet Layer 3 networks using off the shelf switches, and routers for audio routing via one or more sub-nets.

A total of 512 channels can be routed on a 1 Gigabit network, and more if the network capacity is higher.

DX32R is TCP/IP controlled via one of the two Ethernet ports vi the DADman Control software available for both Windows and OSX.

The routing of the IP audio via Dante is done by using the Audinate Dante controller software.

    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.16LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16MR provides 16 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 16 In
  • 16-bit, 24-bit, 32-bit
See the product
Xilica_Gio_XLR
  • Xilica

Xilica – Gio XLR

True connection unlocks the power of possibilities. With Gio XLR, proprietary analog audio products can be connected into an installed network for centralised management, routing and control. Leveraging Dante audio-over-IP technology, Gio XLR is a dual-gang in-wall endpoint with a single cable installation for both power and data. It offers a 2×2 input/output combination with mic/line switching and software-selected 48V Phantom power, making Gio XLR a versatile bridge between audio and IT.

    I/O Interfaces
See the product