MC2 Audio – Delta 120


More details

Similar Products

linea-research-48Mxx-dante
  • Linea Research

Linea Research – 48M03-Dante

The Linea Research 48M03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 48M03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea research 48M Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
ram-audio-V12044_1200px_0|ram-audio-V12044_1200px_0
  • RAM Audio

RAM Audio – V12044

RAM Audio V12044 (W12044) is a four channels amplifier able to deliver 12000 W into 4 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking. RAM Audio V12044 (W12044) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 12000 W into 4 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.
    Amplifiers
ashly-nXe-1.52_600px
  • Ashly Audio

Ashly – nXe1.52bd

The nXe1.52bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 2 In