Cart
← Back to Product Catalog

Millennia – AD-596D

Dante Interface Cards

More details

Similar Products

K-Array_-_K-Dante
  • K-array

K-array – K-dante

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches.   The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches. One cable does it all. A single CAT-5e or CAT-6 can carry both the audio signal (two-channel AES/EBU) and the data to manage all the devices in the network with the K-framwork software. Dante is an uncompressed, multi-channel networking technology that allows to transmit digital audio and data across standard IP networks.
    Dante Interface Cards
  • Dante Ch: 2 In
  • 48kHz-96kHz
See the product
RTS_OMNEO_OMI_cards|RTS_OMNEO_OMI_cards
  • RTS

RTS – OMI ADAM Matrix Card

This card fits into the standard slots of the RTS ADAM or ADAM-M frames and provides a gateway to the world of OMNEO IP-compatible networking. The card consists of the traditional ADAM front and back card components.
    Dante Interface Cards
  • Dante Ch: 64x64
  • AES67 Enabled
See the product
RDL - EU-BTN21
  • RDL

EU-BTN21

The EU-BTN21 modules are Dante or AES67 networked, wall-mounted audio interfaces that provide bidirectional Bluetooth audio. The modules are configurable using RDL CONSOLE software. The module multicasts Bluetooth media data and module function status for use with RDL CONSOLE software and other compatible software. Stereo or summed mono audio is available to users through two Dante network channels. Stereo or mono audio may be selected using RDL CONSOLE software or by remote control commands. One Dante channel may be routed back to a connected device through the Bluetooth interface enabling full duplex communication. The installer can customize the module Bluetooth name using RDL CONSOLE software. The default module name is EU_BTN21_G2. Additional settings include the LED dim intensity and the timeout to dim the LEDs. The default timeout is 30 seconds. The EU-BTN21 modules are PoE-powered. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.
    Dante Interface Cards
  • Dante Ch: 2x2
  • 24-bit
See the product