Cart
← Back to Product Catalog

Monacor – EDL-80DT

Speakers

More details

Similar Products

s218
  • Cadac

Cadac – S218

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

    Speakers
See the product
CA-404DA
  • DMIX

DMIX – CA-404DA

Technical parameters：

Speaker model: CA-404DA

Speaker type: Active Speaker

Unit composition: 4×4" Full frequency unit

Frequency response: 100Hz-17kHz （-10dB）

Sensitivity: 94dB

Rated impedance: 8Ω

Sound pressure level: 124dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

    Speakers
See the product
SpikSub
  • FRENETIK

FRENETIK – Spik Sub

Compact amplified subwoofer, Dante™ processed, PoE+ • Latest generation 60 W class D amplifier board with integrated DSP • Omnidirectional • Wooden cabinet - Euroblock connector for use with external amplification • Base plate for coupling with SPIK 6 (with SMP tube) • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data:
Type: Amplified Sub, Dante™ PoE+
Power (passive mode): 150 W (8 ohms)
Amplification: 60 W (class D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 8" woofer
Peak SPL capacity (1 m): 119 dB
Bandwidth (-10 dB): 40 Hz - 100 Hz
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Top plate : for SMP tube
Insert : no
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 330 x 290 x 400 mm
Weight: 12.00 kg

    Speakers
See the product